Elite Electronic Engineering Inc.
EMC and Environmental Stress Testing
Consulting, Certification, Program Management
1-800-Elite-11 Home| About Us| Site Map| Contact Us

Military EMC Testing

Military EMC Testing

Military EMC Testing

Military EMC Testing

Military EMC Testing

Military EMC Testing

Since 1954, Elite has been providing EMC test services for manufacturers of military electronic systems. Because of our half-century commitment to this industry, our staff has accumulated thousands of hours of experience testing sophisticated defense electronics for every branch of the armed services.

Military EMC Test Expertise

  • MIL-STD-461/462—Revision F, E, D, C, B, and A
  • DEF-STAN-59-41—U.K. Military EMC Spec
  • MIL-STD-1275—Vehicle power quality
  • MIL-STD-704—Aviation power quality

 iNARTE Certified Engineers
Elite's staff of EMC Engineers are iNARTE certified to assure you the highest caliber of expertise and service. 

NVLAP Accreditation for All MIL-STD-461 Tests
Assures acceptance of Elite’s test data. NAVAIR requires electronic systems to be evaluated
by a NVLAP accredited EMC laboratory

Combined Test Services of EMC (MIL-STD 461) and Environmental Stress Testing (MIL-STD-810). Provides convenience and less cost to run EMC-ENV tests concurrently.

 

HIRF Testing

Elite’s powerful collection of amplifiers can deliver High Intensity. Radiated Field (HIRF) testing in excess of 200V/m throughout the range of 10kHz to 40GHz, and higher levels at other ranges.

RS103 High Field Radiated Susceptibility:

  • 200V/m from 10kHz-40GHz
  • 600V/m from 400MHz-1000MHz
  • 1000V/m-1500V/m from 1GHz-18GHz (Pulsed RF) anechoic chamber
  • 2000V/m-3000V/m in the mode tuned chamber

Military EMC Testing Equipment and Capabilities

  • 10kW amplifier for CS116 damped oscillatory wave at 10A
  • CS 114 current clamps for 2 inch bundles
  • LISNs (DC-480V 3phase) up to 200 Amps
  • Variable Speed Generator Drive Stands capable of running alternators, generators, and pumps (12 hp, 5000RPM)

Special Utilities and Large Test Item Services

  • In-house fork-lifting capacity is 2000 lb. pallet load
  • Waveguide feedthrough on RF test chambers for hydraulic and pneumatic hoses
  • Compressed air: 90PSIG, 150CFM, Refrigeration Dried; Cooling water: 30PSIG, 7GPM
  • Configurable resistive power load banks and heat exhaust capability

Test Reports and Test Plan Development

Elite technical documentation services include the development of formal test plans and test reports.

Internet Marketing & Web Design by Milwaukee Based Top Floor Technologies